New High Resolution

1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor

1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor
1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor
1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor
1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor

1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor    1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor

"New 1MHz High Precision Benchtop LCR Bridge / Meter". TEST FREQUENCY RANGE FROM 10Hz to 1MHz!! ET3500 series LCR digital bridges are high-precision component parameter analyzers. Balancing bridge principle, featuring 10 Hz1. Continuously adjustable frequency, 0.05% of basic measuring accuracy, automatic level control.

List scanning and position counting, which can provide accurate and complete measurement and. Analysis for most components and materials, so it is wildly used in product R&D. Component incoming inspection and online product sorting. Mpedance parameter evaluation and performance analysis for capacitors. Inductors, magnetic cores, resistors, piezoelectric devices, transformers.

Chip components and network components. Nalysis of parasitic parameters transistors. Mpedance evaluation of printed-circuit boards, relays, switches, cables, batteries, etc.

Ielectric constants and loss angle of plastic, ceramic and other materials. Valuation of magnetic permeability and loss angle of ferrite, amorphous bodies. Ielectric constant, electric conductivity and. C-V characteristic of semiconductor materials.

Ielectric constant, elastic constant and. Other C-V characteristic of liquid crystal unit. 50 kHZ frequency range, 0.1% basic accuracy, 5 1/2 digit display. 50 kHZ frequency range, 0.05% basic accuracy, 5 1/2 digit display. 100 kHZ frequency range, 0.05% basic accuracy, 5 1/2 digit display.

200 kHZ frequency range, 0.05% basic accuracy, 6 1/2 digit display. 300 kHZ frequency range, 0.05% basic accuracy, 6 1/2 digit display. 500 kHZ frequency range, 0.05% basic accuracy, 6 1/2 digit display. 1 MHZ frequency range, 0.05% basic accuracy, 6 1/2 digit display. 0.05% basic accuracy or 0.1% basic precision. A maximum of 200 time/s measuring speed. Frequency measurement range of 10 Hz- 1. Amplitude of excitation signal 10 mV- 2 V adjustable. Additional DC bias voltage supported. Automatic level adjustment of voltage or current. V, I testing signal monitoring. 256 groups of correcting data for specified frequencies. LED display screen, Chinese and English.

USB, Ethernet, RS232, IEEE488, Handler interfaces. (at a step of 1mHz). (At a step of 1mVrms). Internal -2V to +2V voltage bias.

External bias input (within ±60V). Internal resistance of signal source. 30 Ohm or 100 Ohm, selectable. 9 groups of qualified setting, one group of unqualified setting, one group of auxiliary setting. Self-calibration, open circuit/short circuit frequency sweep, 100 groups of specified frequencies. IEEE488, LAN, RS232, USB, Handler. 50Hz/60Hz; (A free 110v to 220v ac adaptor for the Countries have 110V AC source).

Ethernet, RS232, IEE488, USB and Handler interfaces. If needed, we can supply a free 110V to 220V AC adaptor for Countries have 110V power source. We will investigate the problem and decide on replacement is needed or else solution. We will try our best to handle the matter.

Please Feel Free to ask if you have any inquiry. The item "1MHZ HIGH PRECISION / RESOLUTION BENCH / BENCHTOP LCR/LCZ/RCL METER, D, Q FACTOR" is in sale since Sunday, August 11, 2019. This item is in the category "Consumer Electronics\Other Consumer Electronics".

The seller is "e-trader500" and is located in HONG KONG. This item can be shipped worldwide.

  • Type: tester
  • Brand: east tester

1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor    1mhz High Precision / Resolution Bench / Benchtop Lcr/lcz/rcl Meter, D, Q Factor