Bit One HD - Audison Bit One HD 13 Channels Hi-Resolution Digital Signal Processor. Analog Devices DSP (ADSP-21489), 32 bit floating-point Sharc series (450 MHz clock).
Cirrus Logic (CS5368 8ch and CS4365 6ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance. Inputs 12 independent high-level channels (signal-summing) or 6 independent analog low-level channels.2 analog low-level stereo auxiliary inputs. 2 optical digital inputs (TOSLINK). 8 Preset separately managed and recalled from the DRC MP. 13 IIR or 9 FIR independent low-level analog channels and 2 AD Link outputs. 13 IIR or 9 FIR independent digital audio channels to be connected through two CAT 5. S LAN cables for use with AD Link provided amplifiers. ART, Automatic Remote turn On/Off for high level inputs through the DRC MP.
Guided procedure for the calibration and signal routing of the input channels to the output channels based on type and number of inputs, loudspeakers and amplifiers, for the system setup to be developed. Signal summing, De-Equalization and Delay compensation. Automatic algorithms dedicated to the reconstruction of a stereo signal from a multi-channel signal and to fine-tune the signal in advanced OEM systems: time delay compensation (De-Ta); sum of multi-amplified and limited bandwidth signals; signal de-equalization (De-Eq). Input sensitivity automatically adjusted for the main inputs (Wizard with CD and DVD Test).
Manual input sensitivity adjustment for auxiliary inputs (SW). Independent level control for each output channel for system fine-tuning (-40 ÷ 0 dB). Automatic system for the dynamic equalization between low and high listening levels, to be selected by the user via DRC MP. Four 5-poles parametric FIR type equalizers, one for each source. Thirteen 11-poles IIR equalizers / Nine 5-poles FIR equalizers (alternative FIR firmware), one for each output channel.
5-poles parametric FIR type main equalizer. Low frequencies enhancement based on parametric equalizer, bound to the Woofer and Sub sections, to be set up by the user and selectable via DRC MP. Filter type: Hi-Pass, Lo-Pass, Band-Pass, Full Range.
Cut-off frequency: 70 steps available from 10 ÷ 20 kHz. Cut-off slope: 6 ÷ 48 dB Oct. Bessel 6 ÷ 36 dB Oct.
Alignments: Linkwitz, Butterworth, Bessel, FIR mode (alternative firmware version). Mute/Solo: for each output (On/Off). Phase: for each output (0°/180°).
Procedure to set up the time delays on the real distances between the loudspeakers and the listening point (0÷22 ms max). The system also provides for a manual fine-tuning in steps of 0.01 ms. Auto restart in case of DSP fault.
Control: Master Volume (-60 ÷ 0 dB), Subwoofer Volume (MUTE, - 11,5 ÷ 0 dB), Balance, Fader; Inputs selection; Management of the pre-sets stored; Bass Boost function turn on/off. 1 micro USB connector (1.1/2.0/ 3.0 compatible) to connect to the PC. Windows-based software (32/64 bit): Windows XP, Vista, 7, 8, 8.1, 10 available in Standard or Expert mode.Minimum resolution: 800 x 600. You will be issued a Return Authorization Number. In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product. The item "AUDISON BIT ONE HD 13 CHANNELS HIGH RESOLUTION CAR DIGITAL SIGNAL PROCESSOR NEW" is in sale since Tuesday, December 23, 2014. This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Video\Video In-Dash Units w/o GPS". The seller is "woofersetc_outlet" and is located in Los Angeles, California. This item can be shipped worldwide.