New High Resolution

SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor

SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor
SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor
SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor
SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor
SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor

SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor    SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor

The new SmartTool Pro is the professional's HighResolution digital sensor module that. Can be used as pocket inclinometer, protractor or angle finder. The special HighResolution sensor model displays inclinations to 2-decimal places in degrees°.

Slope in % and pitch in mm/m, ins/ft or digital ins/ft. The SmartTool Pro is the European version of the US SmartTool GEN3 model. Incorporates many new practical features. Back Light button to illuminate the LC display. Turns off after 1 minute to conserve battery life.

Protection to IP65, to prevent water and dust penetration. Hold freezes the reading and can be used to convert degrees to slope or pitch, etc. Calibratio n feature to enable the user to re-set to factory settings to both the horizontal XY plane.

Directional Beep the listen and level feature guides you to your angle so you dont have to see the level. The beep rate increases as angle is approached and is steady when angle achieved.

Perfect for'blind' levelling and inclination settings. Alternate Zero mode to set any angle as the 0° reference. The display shows "Alt" with a dot flashing.

Angle Copy mode is activated by pressing the Hold/Copy button and then the Listen & Level button. The Copy angle will be frozen on the display. Patented Sensor The SmartTool Pro Digital Inclinometer module incorporates the patented liquid capacitive.

Disc sensor manufactured in their US factory's Class 1000 cleanroom. This sensor has a unique microprocessor controlled "auto-calibration" feature also thermal compensation circuitry. Please note that other MEMS accelerometer sensor based levels are susceptible to temperature changes. That result in resolution errors! Angle displayed in degrees (°), slope (%) or pitch (mm/m, ins/ft & ins/ft digital).

Very high stability readings throughout temperature range. Acoustic signal at horizontal and vertical. LC digital 4-figure numeric display with back light and battery state indicator. Display can be read even when level is inverted for overhead measurements.

Alternate zero feature to set any angle at 0°. Hold & copy mode to freeze reading.

On-site owner recalibration to factory setting. Auto shut-off after 6 minutes. High impact resistant ABS polymer case. Sealed against dirt and water penetration. Complete with battery, case and instructions. Measuring Range - #4 x 90° (=360°) Resolution - 0.05° Angle accuracy - ±0.05° at ±0° & ±90° ±0.1° at all other angles Slope accuracy - ±0.1% Pitch accuracy - 1mm/m, 1/8in/ft & 0.01in/ft Accoustic signal - 0° and 90° Operating temperature - -10°C to +50°C Power supply - 9v PP3 battery included Duration - 400 hours Auto shut-off - 6 minutes Dimensions - #170 x 54 x 36mm Weight - 0.4kg (includes battery & case) Spot-On Part No - 92535. The item "SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor" is in sale since Sunday, November 20, 2016.

This item is in the category "Business, Office & Industrial\Industrial Tools\Measuring Tools\Spirit Levels & Plumb Bobs". The seller is "laserlevelshop2010" and is located in London. This item can be shipped worldwide.

  • Brand: SmartTool
  • MPN: MD 92535
  • Type: Digital Inclinometer
  • Display: Digital
  • Sub-Type: LCD


SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor    SmartTool Pro Digital Inclinometer Protractor 0.05° High Resolution Sensor